4
If you have any questions , please contact The Fitness Generation, +61 (03) 9765 9999.
www. healthstreamfitness.com.au
Free call number 1300 796 636
FIGURE_1 ASSEMBLY FOR REAR STABILIZER
HOW TO KEEP THE MACHINE STABLE
** After you finish assembly (Figure 1 & Figure 3), if the machine can't be stand stable,
you can use adjusted-end(C1) to adjust the machine.
Step1.Secure the rear stabilizer(C) to the main frame(A), using two screw(N1), two spring
washer(N4),washer(N3) and two nut(N2).
A
C1
N3
N2
N4
C
N1
D
A1
A2
A3
A4
FIGURE_2 ASSEMBLY FOR CENTRAL SUPPORT TUBE
A4-1
A
Note:the screw(A3) is for fixing the central supporing tube(D) and the main frame(A) .
Please do not tighten it for the assembly of FIGURE 4 easily
First, remove the bolts(A3), spring washer(A4-1) and washer(A4) from the main frame(A).
Step1. Connect the cable(A1) & ( A2).
Step2. Assemble the central support tube(D) onto the main frame(A) with bolts(A3),
spring washer(A4-1) and washer(A4).
Attention :when pushing the tubes toghter make sure not to pinch the cables.
