background image

22

Press the iFit Live button to download the next

workout in your schedule. Press the My Trainer

button, the My Maps button, the World Tour button,

or the Event Training button to download the next

workout of that type in your schedule. Press the

Compete button to compete in a race that you have

previously scheduled. For more information on the

iFit Live workouts, please see www.iFit.com. Note:

If there are no workouts of the selected type in your

schedule, the next workout in your schedule will be

downloaded.

When you select an iFit Live workout, the display

will show the duration of the workout, the distance

you will walk or run, the approximate number of

calories you will burn, the name of the workout, and

the maximum speed and incline settings. If you se-

lect a competition workout, the display will count

down to the beginning of the race.

Note: Each iFit Live button can also run two demo

workouts. To use the demo workouts, remove the

iFit Live module from the console and press one of

the iFit Live buttons.

5. Start the workout.

See step 3 on page 20.

During some workouts, the voice of a personal

trainer will guide you through your workout. You

can select a setting for your personal trainer (see

THE INFORMATION MODE on page 23).

To stop the workout at any time, press the Stop

button. The time will begin to flash in the display.

To resume the workout, press the Start button or

the Speed increase button. The walking belt will

begin to move at the speed setting for the first seg-

ment of the workout. When the next segment of the

workout begins, the treadmill will automatically ad-

just to the speed and incline settings for the next

segment.

6. Follow your progress with the displays.

See step 5 on page 18.

The My Trail tab will show a map of the trail you

are walking or running or it will show a track and

the number of laps you are completing.

During a competition workout, the Competition tab

will show your progress in the race. As you race,

the top line in the matrix will show how much of the

race you have completed. The other lines will show

your top four competitors. The end of the matrix

represents the end of the race.

7. Measure your heart rate if desired.

See step 6 on page 19.

8. Turn on the fan if desired.

See step 7 on page 19.

9. When you are finished exercising, remove the

key from the console.

See step 8 on page 19.

For more information on the iFit Live mode, go to

www.iFit.com.

THE COOL DOWN MODE

To select the cool down mode, press the Cool Down

button. Then, press the Start button. The walking belt

will begin to move at 2.5 mph. After a few minutes, the

walking belt will slow to a stop.

Summary of Contents for H105t Treadmill





































Reviews: