FIS-001
Page 29 of 33
[100%] would indicate highest level possible.
[000%] would indicate lowest level possible. (LEDs Turned OFF)
The LED brightness is increased by 10% every time the button is pressed.
The GUI will have a different representation of each level selected.
Once 100% is reached if the increase button is pressed again, the LEDs will be turned
OFF.
10.9
Increasing the Illumination Level Using Button on Device Handle
To increase the brightness of the camera LEDs, press the
“Up Arrow”
on the Control
Handle. This will be equivalent to using the GUI, and the Illumination change results will
be the same.
Up/Down Button on handle is as follows:
The user will observe the Illumination change behavior in the GUI as previously
explained.
[100%] would indicate highest level possible.
[000%] would indicate lowest level possible. (LEDs Turned OFF)
The LED brightness is increased by 10% every time the button is pressed.
The GUI will have a different representation of each level selected.
Once 100% is reached if the increase button is pressed again, the LEDs will be turned
OFF.
