Health O Meter 501KG, User Instructions

Page: 22 / 51

P/N UM501KL_501KG_REV20201201_web
22
MAINTENANCE AND CLEANING
Maintenance
The following pages provide instructions for maintenance, cleaning, calibrating, and
troubleshooting of the scale. Maintenance operations other than those described in this manual
should be performed by qualified service personnel.
Caution: Before first use, or after long periods of non-use, check the scale for proper
operation and function. If the scale does not operate correctly, refer to qualified service
personnel.
1. Check overall appearance of the total scale for any obvious damage, wear, and tear.
2. Inspect the AC adapter cord for cracking or fraying, or for broken/bent prongs.
Cleaning and Disinfecting
Proper care and cleaning is essential to ensure a long life of accurate and effective weighing.
Caution: Disconnect the scale from the AC adapter power source prior to cleaning the
unit.
1. Health o meter ® Professional recommends using one of the following cleaning solutions on a
soft cloth or disposable wipe:
●
mild soap and water solution
●
70% isopropyl alcohol
●
solution with 1-5% hydrogen peroxide concentration
After cleaning/disinfecting, wipe with a cloth dampened with water and then with a clean dry
cloth. To avoid residue build-up or damp surfaces, ensure the screen and scale parts are
completely dry after cleaning.
2.
Never use rough or abrasive materials to clean the scale, as these will damage the scale’s
finish.
3. Do not submerge the scale in water or any other liquid.
4. Do not pour or spray fluids directly on the scale.
Replacement Parts
Parts are available if a piece of the scale needs to be replaced. Contact Health o meter ®
Professional Scales Customer Service at 1-800-815-6615 to inquire about the availability of these
replacement parts.
Part # Description
500HEADPIECE Headpiece for height rod
501KLROD Height rod
501KLWHEELS Set of 2 wheels
501KLFOOT Foot for base
501KLMAT Replacement mat for platform
BATTDOOR500 Battery compartment door
501KLPILLARFOOT Foot for pillar
ADPT30 Power adapter
500REDINDICATOR Red indicator tab at height rod base
500HRTAB Connector tab for height rod
500PILLARTAB Connector tab for pillar