Cut the tape cover
Mount the housing
Cut the green plastic tape cover (foil) at the back side
of the GIpro unit as shown.
Remove the bolt from the clamp, place the housing
in the desired position and fasten the bolt.
Put the GIpro unit into the housing and push it firmly
for a few seconds.
If you ever need to remove the GIpro from the
housing, use a small flat head screwdriver to lift it up.
Do NOT pull the cable!
Remove the smaller portion of the green plastic tape
cover. Keep the larger portion on the unit.
Do NOT remove the whole cover, otherwise you will
not be able to remove the display from the mount later.
Remove the tape cover
w w w . h e a l t e c h - e l e c t r o n i c s . c o m
Place the unit in the mount
