Healson Technology Co.,Ltd.
12
►To avoid causing the damage of operators’ hand,
wrist or arm,Please note the following matters:
1
）
Keep the body in a balanced position during the
scanning operation.
2
）
During the operation, relax muscles regularly to
avoid prolonged repetitive operation.
3
）
DO NOT over-tighten the probe to avoidoperating
in an uncomfortable position,which may result in the
damage of operators’ hand, wrist or arm .
1.6 Probe Safety
►If probe is dropped or collided with other
hard objects, DO NOT use it until the leakage
test has verified that the electrical safety is not
impaired.
► Never immerse the probe into liquids such
as water or disinfectant to clean because it is
not waterproof. Immersion may cause electric
shock or malfunction.
►Using the probe with caution, damage to the
probe may increase the risk of electric shock.
Please check frequently whether there are
cracks or openings in the shell,holes inside or
around the sound lens, or other damage to
resulting in water flow into probe.
►If contact surface of the probe is scratched,
immediately stop using it and contact the sales
office or distributor. If use a scratched probe,
there is a risk of electric shock.
► Avoid excessive bending the probe cable to
prevent the probe electrical safety from the
damage caused by the cracks or damage of
the probe shell, or cable breaking or exposure.
►DO NOT disinfect the probe with steam,
heat, or liquid sterilization, which can cause
permanent damage to the probe.
► DO NOT connect or disconnect the active
probe during real-time scanning,Probe could
be plug in/out with power on under freezing
condition or after existing ultrasound system.
► Repeated disinfection will reduce the probe
safety function, please check the probe's
