Healson Technology Co.,Ltd.
10
Probe:
All probes are attached to the shell with a data of working frequency and a raised
dot.The dot indicates the direction.
The raised edge corresponds to the "
" mark on the scan screen. The "
" mark
indicates the direction of the scanning probe.
Notes
：
If the probe parameters or specifications are changed, please consult the company's
after-sales service department or refer to the latest instructions.
1.3 Safety Classification
According to the type of electroshock proof:
Class II equipment.
According to the degree of electroshock proof:
Type-B applied part.
According to the degree of protection against harmful ingress of water
The grade is IPX.
According to the degree of safety of application in the presence of a FLAMMABLE ANESTHETIC
MIXTURE WITH AIR or WITH OXYGEN OR NITROUS OXIDE:
Not AP/APG.
Whether the the device have application to discharge part of the protective effect of defibrillation.
The device does not have an application part that protects against defibrillation effects.
According to the mode of operation:
Continuous operation mode.
1.4 Patient Safety
► Please keep the correct identification of all patients’ data, and
verify the accuracy of such data when entering the patient's
name or ID number. Make sure that all data and the patients’
identification provided in the print are correct. Identifying errors
may result in incorrect diagnosis.
► Make sure that the confidentiality of patients’
information data.
► After accessories disinfecting,the chemical reagent
or gas must be completely removed. The residual
chemical reagent or gas will not only cause damage
to the accessories, but also harm the human body.
►DO NOT use this system in the presence of flammable
gases (e.g., anesthetic gas, hydrogen) or flammable
liquids such as ethanol, otherwise it may cause an
explosion.
► There may be a risk of electric shock if any lighting,
