healingHHR787HDDigitalTerrestrialTwinTunerRecorderOperatingManual
Power Source
The HHR787 has the flexibility of dual power 240V AC or 12V DC.
z
For 240v AC operation connect the AC power cord of the HHR787 to your
AC Power, and switch On.
z
For 12v DC operation (e.g. caravans, motor homes, boats) connect your
separately purchased
12v Lead with correct polarity
to the 12v power
socket on the rear panel of the HHR787. N
NOTE: Centre pin is +Positive.
Do not connect Mains and DC at the same time!
START UP
Once you have connected your preferred Video and Audio Outputs of the
HHR787 to the TV’s Inputs and connected the antenna and power source,
please action the following start up procedure:
z
Power On the HHR787 – i.e turn on the ON/OFF Switch on the rear panel of
the HHR787 – a red LED will appear in the units display.
z
A page will appear prompting you to SCAN Yes/No.
z
Select YES and press the OK key on the remote control.
Note: If you do not make a selection, after a few seconds the unit will
automatically begin the SCAN process.
z
Unit will be begun to scan TV and Radio channels in your location and this
will take a few minutes.
z
The scanning process is designated on a screen page adding each
channel found.
z
Once the scan process has been completed, a SEARCH RESULT page
will appear briefly designating the Search Result of the number of TV and
Radio channels found.
z
TV programs can now display.
Time Zone and Daylight Saving Time Setting
Set your Time Zone according to your State.
Set Daylight saving On or off.
z
Press MENU on the remote control and MAIN MENU page will appear
z
Using the main Up/Down arrow key Scroll down to SETTINGS
z
Press OK and SETTINGS page will display
16
