Headwave TAG, Manual

Page: 27 / 92

22
the helmet‘s surface. If so, push on each side until the edges are firmly
affixed. TĀG is designed to accommodate some flexing, so don‘t worry
about damaging it. If you’re having difficulty securing the edges, place
pressure on them overnight. The adhesive will initially have 20% strength
and build to 100% over 24 hours. Minor gaps at the edges shouldn’t have
any consequences to the mounting strength or the sound quality.
Event Status Light feedback Acoustic feedback
Press Button once (short) Product on GREEN Ascending tones
Press Button long (2 sec.) Product off Off Descending tones
Bluetooth® not connected Pairing Mode BLUE flashing -
Press Button once short
while streaming Pause GREEN
flashing -
Battery low Battery low RED + GREEN 1x Alerting sound,
30min left