HE-VA Tip-Roller XL 12,30 m, Operating Instructions Manual

Page: 12 / 48

UK Tip-Roller XL 12,3 – 15,3m 04-09-2019
12
Safety Instructions, regarding Hydraulic System
1. The highest allowable pressure, is 225 bar.
2. It is recommended to mark the hydraulic connections between the implement and tractor, to
avoid incorrect operation!
3. When checking for hydraulic leeks, suitable safety gear must be used due to danger. (Safety
goggles , gloves, etc.)
At high pressure, hydraulic oil can penetrate the skin and course serious injuries.
At injuries, consult a doctor immediately. RISK OF INFECTION!
4. Before any work at the hydraulic system, the implement must be lowered to solid ground.
Pressure must be relieved, engine stopped, and ignition key removed.
5. Check the hydraulic hoses on a regular basis, however, every six months as a minimum due
to any cracks, wear and tear, etc. Replace any defective hoses immediately.
6. Hydraulic hoses lasts for no more than 5 years.
New hydraulic hoses must be identical to the manufacturers specifications.
Safety and other markings on the machine
Several markings are located at your machine, which contains safety regulations and other
instructions to inform about correct operating.
Please read these instructions carefully, and make the driver aware about the markings and safety
regulations in this Operating Instructions. Keep the markings clean and readable. If they are not,
they must be replaced.
Oil, type Hydro Texaco HD 32 has been
filled in the hydraulic system