7. PC controller user guide
Installation
The PC controller is green software. Just use a cable to connect the PC via RS232 port
and copy “4x2 HDMI matrix Controller.exe” to PC to complete installation.
Preparation
1. Connect PC and multi-viewer by RS232 cable (headers of both sides of cable should
be FEMALE)
2. Power-up multi-viewer
3. Double click 4x2 HDMI matrix Controller.exe icon to run it
General Page
1. Select RS232 COM port
2. Click to connect or disconnect PC and Matrix
3. Click to refresh device status: include device information and Input/Output Settings on
“Matrix” page
4. Click to clear device information
5. Click to reset to the factory settings
