background image

3. IR TX: Connect the IR Blaster cable included in the package for IR signal

transmission. Pace the IR blaster in direct line-of-sight of the equipment to be
controlled.

4. IR RX: Connect to the IR Receiver for IR signal reception. Ensure that remote being

used is within the direct line-of-sight of the IR receiver.

5. OUT B: The HDMI is where you connect the HDTV or monitor with HDMI cable for

input source display.The Coaxial audio output is where you connect to the
amplifier with coaxial cable.

6. OUT A: The HDMI is where you connect the HDTV or monitor with HDMI cable for

input source display.The Coaxial audio output is where you connect to the
amplifier with coaxial cable.

7. DC 5V: Plug the 5V1A DC power supply into the unit and connect the adaptor to

AC wall outlet.

5.3 Connect and Operate

1. Connect the signal sources such as Blu-Ray Player, Play Station 3, audio/video
receiver, satellite receivers and computers equipped with HDMI output interfaces
with a short high-speed HDMI cable to the HDMI Matrix inputs.
2.Connect the HDMI output from the HDMI Matrix to a high-definition display device
such as HD-LCD, HD-DLP and HD projectors with HDMI input interfaces. Use
high-speed HDMI cables that are recommended for the distances that are required for
each connection.
3.The Matrix is powered by an external power supply which is included. Connect
power first to the source, then to the Matrix and then to each HD TV or projector.
4.The input source can be controlled from the display. This is accomplished by using
an optional IR Receiver pigtail pointing away from the display(s), which can be
connected with the optional HDMI IR Adapter, and inserted between the HDMI cable
connector and the display with the toggle switcher at the “IR” position. The IR
Transmitter pigtail is then connected to the Matrix and pointed to the source(s). A
remote control is used at the display to select switch inputs and output.The matrix
also have the capability of being controlled via Remote control.

5.4 Wideband IR(30KHz---60KHz) introduction

Summary of Contents for HDTVHDM942U











Reviews: