uSe directalk™ aS a loop induction receiver
1. When you are inside a facility wired for a loop
induction system, set the volume control (14)
to the 50% point and turn on (4) the unit. Set
the Mode Switch (8) to the “T” position.
2. Adjust your listener’s volume control (14) and
tone control (12) for best loudness and clarity.
3. Turn off the unit when you are done.
4. Change the Mode Switch (8) back to the “Mic”
setting so it becomes a listener again
Many public facilities use a loop induction
system to broadcast audio signals (in addition to
sound broadcasting). The advantage of the loop
receiver is that there will be less environment
sound / noise because the listener microphone
is turned off in this mode.
7
4
6
8
5
12
14
13
