converSation and watcH tv
1. Set the Mode Switch (8) to “Mic” position.
Set the volume control (14) at the 50 % point.
Turn on (4) the unit and verify the On / Off
indicator (5) is lit. Place the listener around
your neck as shown and insert ear-buds into
your ears. Caution: Do not let any ear-bud to
come near the microphone (6) because this
could cause squeal in the ear-bud.
2. You should now hear all environmental sounds
around you. Adjust the rotary volume control
(14) slowly to select a comfortable loudness
level. Caution: If you hear squeal in the ear-
bud, please lower the volume setting.
3. If you notice there is an imbalance of loud-
ness in the ear-buds, you can re-balance the
loudness by adjusting the Balance control (13)
setting on the rear of the unit.
4. Try all three tone control (12) settings to deter-
mine the best setting. Remember this setting
for future use. Caution: If you hear squeal in
the ear-bud, please lower the volume setting.
DirecTalk™ amplifies TV sounds without turning
up its volume. You and your family can now
enjoy the same TV program at the same time
without compromising on the TV volume setting.
4
6
8
5
12
14
13
5.
Optional TV microphone module:
You
may purchase this module for direct connection
to DirecTalk. This module comes with a 15’
cable which allows you to place the microphone
module next to the TV speaker for maximum
signal pick up. Please contact a Serene Innova-
tions dealer for availability.
