H1 CPU Heatsink System Installation
Install four feet with rubber cushion to the bottom plate via 4pcs M*6 HEX screw
C
. Install
four 7mm copper post
F
on the bottom plate ITX motherboard installation position and use
M3 nut
H
to fix the copper post from the back.
Install aluminum power button and side I/O PCB using four copper post (12mm height)
E
and
four M3*6 screws
A
. PWR does not have polarity. LED polarity is shown below.
Install the
H-5
rack on the copper baseplate using
4pcs
H-1
. Install the
H-6
LGA115x
bottom rack for Intel CPU or
H-7
bottom holder for AMD AM2/AM3/FM1 socket CPU on the
back of the motherboard. Remove the protection cover from the copper baseplate.