Install the metal plate to the chassis side panel using
H-4
.
Apply a thin layer of thermal paste on each groove on the aluminum top plate and install the
aluminum top plate via
8pcs
H-2
. We strongly recommend insert the top plate half way
before fully tightened the
H-2
screws using the included 2.5mm tip HEX screwdriver.
This step is to ensure proper distance between two side panel for the top plate installation.
Power Supply Installation
A:
HDPLEX Internal 80W/160W AC-DC Adapter +HDPLEX 160W DC-ATX
converter
Install the IEC C14 AC connector from the HDPLEX 80W/160W AC-DC package to the H1.S
backplate using 2pcs M3*12 flat head screw
I
.
If the capacitor on your motherboard back corner conflicts with the metal EMI filter box from
the IEC C14 AC connector, please use the IEC C14 without the EMI filter which is included in
the H1 accessories box. Install the H1 backplate to the H1.S V2 chassis using
4pcs
B(M4)
.
