Page
7
of
24
Remove protection cover from the copper base plate and install two
H-5
rack on
the copper bottom plate using 4pcs
H-1
Install the
H-8
holder on to the tip of the two racks. Please make sure the
direction of part H-8 is correct. Install 4pcs
H-3
into the
H-8
holder.
Apply a thin layer of thermal paste to the copper base plate.
Warning: Do not over apply thermal paste as it will decrease heat transfer efficiency.
Put the Intel CPU Bottom Rack
H-6
on the back side of the motherboard Intel
CPU socket (LGA1151/1155/1150) or use 4pcs white double tape to paste the
four bottom holder
H-7
to the back of the AMD socket.
