Page
23
of
24
To install optional handle. First use 4pcs Hex Socket Cap Head M4*14mm
B
to
install the front handle from the back of the faceplate. Use 4pcs Hex Socket Cap
Head M5*8mm
B
to mount the faceplate onto side heatsink panel mounting ear
from the back. Use M5 HEX key Allen wrench to tighten it.
Test PC thoroughly and make sure heatsink system functions well.
Close the H5 top plate using 6pcs
C
. If the distance between two side panels is
too tight for the top plate to fit in, please first loosen the screws in the red circle
below, then insert the top plate half way, tighten the screws for the heatsink
system aluminum top plate, insert the top plate in full and tighten the rest
screws.
