HDI 2100, User Manual

Page: 6 / 23

Pump Stroke Counter
User’s Manual – 2100, Rev D | Aug 2014
6
To Power On : To Power Off :
1. Press Power/Clear Button 1. Press the Select Button once
once. and within four seconds -
2. Press the Power/Clear Button.
There are seven buttons and two LCD displays on the front panel of the gauge.
1. Power / Clear Button (A) – multifunction button to power on or off the gauge. Also
clears the displayed total strokes and/or individual pump stroke count seen on the top
screen.
2. Battery Indicator (B) – battery symbol is displayed when the power voltage drops below
3.x VDC so the user is able to secure a spare / replacement. The symbol appears when
the battery has roughly 30-45 remaining days of use.
3. Pump Monitored (C) – displays the active pump being monitored. This format is also
used in the upper window if an individual pump is being displayed to show an individual
pump’s stroke total.
4. Display (D) – toggles the top screen between Total System Strokes and Individual Pump
Strokes. If the unit only has 3 active pumps, the user will see Zero (0) when toggling the
upper display to Pump 4.
5. Select (E) – toggles in between pump functions.
6. Pumps (#s) – Used to toggle lower screen between different pumps.
“1” – represents Pump 1 “2” – represents Pump 2
“3” – represents Pump 3 “4” – represents Pump 4
A
B
C
D
E
# # # #