Disclaimer:
3
rd
party and/or custom firmware providing extra features are not covered in this manual.
14
4K Diva – User Manual
Help on Ledstrip Installation
Always disconnect your TV from power supply during installation.
Make sure your TV backpanel is clean from any dust.
Start LEDstrip install at the bottom right of TV back panel and go up.
Make sure each segment of the LEDstrip is perfectly centered with the display side where it is applied.
Using the supplied Y cable, connect Power, Diva and LEDstrip all together.
Now simply turn ON any sources at Diva inputs and enjoy!
1.
Connect to supplied 5V 4A Power adapter
2.
Connect to Diva LED control input.
3.
Connect to LEDstrip USB previously installed.
Note
: You can extend USB power or LEDstrip connection
using standard USB cord & Diva LED Control can be
extended using any earphone 2.5mm jack extender
To calibrate and adjust your LEDstrip settings after
installation, please refer to LEDstrip section of the web
server.
If you need more help, you can refer to the below video:
LEDstrip Install Video on YouTube
Ambient Light works using TX1 ONLY.
In order to provide responsive Led Lighting to a display
connected at TX0 output, the active input going to TX0
must also be routed to TX1 (1 in replicated to 2 out)