HDFury 3Dfury User Manual Download Page 35

Page: 35 / 38

Disclaimer:

This product does not process HDCP input. When receiving content that has HDCP encryption

there will be no video output. In some countries a 3

party and/or a custom firmware can be used.

HDfury 4 – User Manual

Highlight Features:

Main features:



Add HDMI 2D and 3D to ANY TV, Monitor, Proj (even 60hz TV !)



Display HDMI 2D and 3D content on Digital and/or Analog display



HDfury4 can output in both Digital and Analog Video/Audio simultaneously!
Therefor acting as an advanced digital/analog splitter.



Double and Triple frame 1080p24 material up to 1080p72



Advanced SimulView

support (through Glasses & Emitter or through Stream Control)



3D mode output up to 720p144



Dual projectors setup using two HDfury4 modules and passive glasses.



Up to 720p240 in dual projectors setup!



7.1 Dolby® True HD & DTS Master Audio



Input: HDMI 1.4 (HDCP compliant) input with 3D and Deep Color support



Output: Digital HDMI / DVI-D and/or Component (YPbPr/YCbCr) and VGA (RGBHV) video output



All modes auto detected if possible, otherwise can be forced via button



3-pin mini-DIN Sync Out (for optional emitter)



Dynamically create EDID based on Sink EDID parameters



Customization settings available through DIP SWITCH and buttons



Perfectly and automatically center image in all standard NTSC/PAL component modes



Manually adjust horizontal screen position in all NTSC/PAL RGBHV modes



Performs Color Depth Up scaling in all modes (ON/OFF user selectable)



Horizontal and Vertical Sync Polarity Inverter included



Automatic SD/HD color-space selection



Accept third party accessories on its output



Improved output cable driver for driving long cable runs (40-50′)



Software/Firmware upgradeable through USB



Sound output:

Analog and Digital Optical (S/PDIF 5.1 Dolby/DTS) through an innovative 3.5mm combo
jack and 7.1 DTS-MA & Dolby True HD via HDMI output

HDMI audio pass-through

Summary of Contents for 3Dfury







































Search results

Summary of Contents for 3Dfury

Reviews:

Related manuals for 3Dfury

Brands by name

Popular brands

HDFury 3Dfury, User Manual

Search results

Summary of Contents for 3Dfury

Reviews:

Related manuals for 3Dfury

Brands by name

Popular brands