File No.
RD-I-18-023
Version
2.0
HDM-B88 User Manual
Effective Date
2018-12-17
Page
10 / 19
10
6. Remote Control
:
Power on or set it to standby status.
Input 1/2/3/4/5/6/7/8:
Press these button to
select input signal source.
: Press these button to select the last or
the next input signal source.
Output 1/2/3/4/5/6/7/8:
Press these button to
select output signal source.
All:
Press this button to select all output signal
source simultaneously.
Operating instructions:
User need select output button firstly and then select input
button to select output display corresponding input signal source.
7. Web GUI User Guide
The Matrix can be controlled via Web GUI. You must know current Matrix IP
address. The static IP address is 192.168.1.100. You can connect PC Web
GUI through dynamic IP address. Generally speaking, you can get IP address
from two ways. The first way gets the IP address via Upper Controller . The
second way gets IP address via on-panel button. Then you need set the IP
address to your PC or laptop or mobile device is within the same IP address
segment with the Matrix. After above, you can enter the Matrix IP address in
the web browser to access Web GUI.
