Help is only an email away:
.
12
XTND can send IR signals bi-directionally between the transmitter
and receiver to control almost any AV device. Using this feature will
allow you to use a remote control at either end of the XTND setup
and pass that IR command from your display location back to the
XTND transmitter or vice-versa.
Sending IR commands from a display ‘back’ to the XTND transmitter
To send commands in the other direction (from the source / XTND
transmitter) to a display, simply follow the process above but swap
any instance of an XTND transmitter with a XTND receiver.
1. Connect an IR TX to port labelled “IR (OUT)” on the XTND
transmitter.
2. Place the IR TX bud (small tear drop part) in front of the IR
window of the device that you wish to control.
3. Connect an IR RX to port labelled “IR (IN)” on the XTND
receiver.
4. Place IR RX in line-of-sight of the remote control.
IR T
ran
smit
ter
(IR TX)
IR Receiver (IR RX)
1.5m
IR (Infrared) control
