15
HD Motion
|
User Manual
SEPARATE LEG RESTS
Separate leg rests can be angled between 80° and 140° in 7
positions. The footrests can be adjusted in height and angle.
The footrests can also be folded up to the side to make it
easier to get in-to and out-of the wheelchair (see Figure 27).
Components, see Figure 26:
1 Release button for leg rest removal
2 Locking knob, leg rest angle
3 Leg rest pin
4 Leg rest tube
5 Footrest tube
6 Footrest plate
7 Snap lock, footrest
8 Screw, footrest angle
HEIGHT ADJUSTMENT OF SEPARATE FOOTRESTS:
- Push in the snap lock (7 in Figure 26) and move the
footrest tube to the desired position.
ANGLE ADJUSTMENT OF SEPARATE FOOTRESTS:
- Loosen the bolt (8 in Figure 26), 10 mm spanner.
- Move the footrest plate to the desired angle.
- Tighten the bolt securely.
ANGLE ADJUSTMENT OF SEPARATE LEG RESTS:
- Grip the footrest tube near the bottom (1 in Figure 28).
- Pull the knob (2) and move the leg rest to the desired
position (3).
- Release the knob and push the leg rest lightly in either
direction so that the locking pin snaps in place.
REMOVAL OF SEPARATE LEG RESTS:
- Grip around the leg rest joint (1 in Figure 29).
- Push in the release button (2).
- Pull the leg rest away from the leg rest mount (3).
MOUNTING SEPARATE LEG RESTS:
- Align the leg rest pin in the seat frame.
- Push in on the release button and push the leg rest in to
the seat frame.
- Release the button and push the leg rest lightly in either
direction so that the locking pin snaps in place.
Figure 27.
Folding up footrest
Figure 28.
Angle adjustment
Figure 26.
Separate leg rest components
Figure 29.
Removal of leg rest
3
2
1
3
1
2
7
6
5
4
8
2
1
3