14
HD Motion
|
User Manual
3.14 Leg rests
CENTRE LEG REST
Centre leg rest can be angled between 80° and 140° in
7 positions. The one-piece footrest can be adjusted in
height and angle. The footrest can also be folded up
against the leg rest tubes to make it easier to get in-to
and out-of the wheelchair (see Figure 24).
Components, see Figure 23:
1 Locking knob, leg rest angle
2 Central tube
3 Leg rest tubes
4 Footrest tubes
5 Footrest plate
6 Snap lock, footrest
7 Knob, footrest angle
HEIGHT ADJUSTMENT OF ONE-PIECE FOOTREST:
- Push in the snap lock (6 in Figure 23) and move the
footrest tubes to the desired position.
ANGLE ADJUSTMENT OF ONE-PIECE FOOTREST:
- Turn the knob (7 in Figure 23) until the footrest reaches
the desired position.
ANGLE ADJUSTMENT OF CENTRE LEG REST:
- Grip the footrest tubes near the bottom (1 in Figure 25).
- Pull the knob (2) on the right hand side and move the
leg rest to the desired position (3).
- Release the knob and push the leg rest lightly in either
direction so that the locking pin snaps in place.
Figure 23.
Centre leg rest components
Figure 24.
Folding up footrest
Figure 25.
Angle adjustment
1
6
7
2
4
3
5
3
2
1