picture 2
DO ATTACH THE MOUNTS TO THE CAMERA WHEN THE
CAMERA IS MOUNTED ON HELMET
;
MAKE
SURE
IT
DOES
NOT
COME
LOOSE
FROM
THE
MOUNTS
AND
CAMERA
TETHERED
BY
THE
SCREW
CAP
.
Playback
on
a
PC
Connect the USB cable to the camcorder properly, and then connect the other end to a USB port of a PC.
Charge the battery using the AC power adaptor or the USB cable.
8
Installing the mounts
Follow the instructions. Fix the mounts to the
camera in the correct direction.
(Refer to picture 1)
Follow the instructions. Using the screw cap to
fix the mount to the 1/4 thread of
camera (Or it can be fixed on other 1/4 tread
mounts). (Refer to picture 2)
picture 1
Recharging the battery from your computer:
If the camera fails to start recording, the battery has probably run
down and needs to be recharged.
Recharge the battery as follows:
• Connect the USB cable supplied to the mini-USB port of your
camera
• Connect the cable USB connector to your computer (in most cases,
your computer must be switched on for the battery to recharge) or
connect the USB connector to the AC wall charger supplied.
The camera should take a maximum of 3 hours to fully recharge
using a computer USB port. When recharging, the LED record
indicator will be red. At full charge, the LED will turn off. If the device
has not been used for a long time, it is better to recharge battery
before use.
AC Adaptor
