13
Camera Overview
Installation and Connection
Installation
On the assumption that User PC and the camera are used under static IP, and the camera is to
be directly connected with User PC or Local Network, The installation procedure is to be;
(1) Connect the camera and PC with LAN cable(Direct cable or cross cable).
(Please use the direct cable if you connect to local network)
(2) Power on camera.
* Using regulated 12V DC 500㎃(No IR LED model) or 1A (Built-in IR LED model)
* Using PoE(Power Over Ethernet) : This camera adopted PoE that supplies power in addition
to data sending and receiving using LAN cable without separate power connection and it
provides convenience for users at installation. When you connect the camera with PoE and DC
adaptor, only PoE is used.
(3) Wait about 2 minute after on camera, the system will be booted.
Alarm in wiring diagram
To connect the external sensor
Connect one sensor(Alarm) line(Yellow) of the sensor to the Alarm in port
and connect the Alarm out(White) line and 12V DC line(Red) to the Alarm out device.
Alarm In
Alarm Out
Max. 100mA open collector
