Operation Manual Ver. 1.3
3
1.2 Front / Rear Panel Introduction
Fig. 1.2.1 The front panel of TC-038D controller, the function of A ~G has been
listed in the table below.
Name
Function
A
PV display
Indicates PV (measured temperature) or function codes
B
SV display
Indicates SV (target set temperature) or function values
C
Data change key
Changes the value on SV, press to increase the value.
Holding down the key will gradually increase the speed of change.
D
Data change key
Changes the parameter value on SV, press to decrease the value.
Holding down the key will gradually increase the speed of change.
E
Shift key
Shift the digits on SV, press to shift the digits left.
F
Mode key
Change the displayed function on PV, press to change the content
on display.
G
Level key
Change the levels on PV.
Press to change the levels (Initial setting level, operation level,
adjustment level)
Setting -> operation: Hold for >1s
Operation -> Setting: Hold for >3s
Operation <-> Adjustment: Press for <1s
