2-20
Note:
For DVD and Combo drives only.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Inserting and Removing a Disc
Follow this procedure to insert or remove a disc:
1. Turn on the computer.
2. Press the eject button and the DVD tray will slide out partially. Gently pull on it until it is fully extended.
3. To insert a disc, place down the disc in the tray with its label facing up.Slightly press the center of the disc until
it clicks into place.
4. Gently push the tray back into the drive.
Note:
In the unlikely event that you are unable to release the DVD tray by pressing the eject button, you can manually release the disc.
To remove a disc, hold the disc by its outer edge and lift it up from the tray.
Operating your computer
