22
Roommate AP Operations Manual Rev 1.0
Pillow Speaker Operation
The pillow speaker type should be set before a pillow speaker is plugged into the unit. See page 14.
See page 14 to disable the TV’s internal speakers.
One Button Analog Pillow Speakers
1.
Press the “TV” button on the pillow speaker to turn the set on.
2.
Press and release the “TV” button to change the channel to the next programmed channel.
3.
To change the direction of the channel change, press and hold the “TV” button until
“CHANNEL UP” or “CHANNEL DOWN” appears on the upper right corner of the screen.
About 3 seconds.
4.
To turn TV off, press and hold the “TV” button until “POWER OFF” appears on the upper
right corner of the display. About 5 seconds.
NOTE: Pillow Speaker Analog Control must be enabled in the Pillow Speaker settings for analog
one button pillow speakers to work. See page 14.
Digital
Any digital pillow speaker that sends Zenith, Philips, RCA or HCI custom codes code may be used with
RoomMate sets. Make sure the TV is setup for the proper pillow speaker being used before connecting
the pillow speaker. For HCI custom pillow speakers use the Zenith setting. See page 14.
Pin Out
Summary of Contents for roommate ap RM22AP
Page 2: ...2...
Page 8: ...8 Roommate AP Operations Manual Rev1 0 Television Inputs Outputs...
Page 30: ......
