10
Roommate AP Operations Manual Rev 1.0
Installing Remote Control Batteries
1. Turn the IR Remote over. Press down on the arrow and slide the battery cover off the bottom.
2. Install the two included AAA batteries. The polarity is indicated on the bottom of the battery
compartment. Make sure the batteries are installed correctly.
3. Slide the battery cover back onto the remote and snap into place.
Once the installation is complete and all optional equipment is connected plug the supplied power cord
into the set and then into a standard 120VAC outlet.
Navigation Icons
To navigate, you will use the left/right/up/down arrow buttons and the GO button to make selections. Alternately, a
USB keyboard and/or mouse can be used.
Common Android Icons
HOME – Go to Home Screen
BACK – Go back one page or menu.
MENU – Opens app menu(s)
APPS Drawer – Open apps drawer
Admin Mode
In order to enter the settings menu, or make any changes to the home page you must be in Admin Mode. Be sure to
exit Admin Mode after you make your changes so patients cannot access the admin settings.
1. Using an IR remote, press the function button.
CODE: 0000000
will appear in red on the upper
right of the screen.
2. Enter code 1236363. If you are on the Home screen the Apps drawer button will appear at the
bottom of the screen.
3. If you change the security code you will need to use the new code to enter admin mode. Admin
mode will time out automatically or you can select the Exit Admin Mode button at the bottom left of
the screen. Button only shows when Admin Mode is enabled.
Exit Admin Mode button
See Annex on page 32 for automated Admin features that include software upgrades, cloning, reset and
log file collection.
Summary of Contents for roommate ap RM22AP
Page 2: ...2...
Page 8: ...8 Roommate AP Operations Manual Rev1 0 Television Inputs Outputs...
Page 30: ......
