hc-cargo 211065, User Manual

Page: 10 / 32

211065 (DT-6920)
10 Vedpak 92_Version 2_021009 11
GB
OPERATION
DC- AND AC vOlTAgE mEASuREmENT
1. Connect the black test lead to “COm” socket and read test lead to the “v Ω Hz" socket.
2. Set the selector switch to desired mv or v position.
3. Press “select” key to choose DC or AC measurement.
4. Measure the voltage by touch the test lead tips to the test circuit where the value of voltage
is needed.
5. On AC range, press “Hz/DuTy” key to measurement frequency or duty cycle .
DC- CuRRENT mEASuREmENT
1. Set the selector switch to desired 400Amp. or 1000Amp. .
2. Press Select key to choose DC measurement.
3. Zero the reading by pressing REl (DCA ZERO ADJ) key.
4. Disconnect the test leads from the meter.
5. Clamp the jaws around the one conductor to be measured. Center the conductor using the
centering marks as guides.
6. Read the result from the display. The arrow on the jaw indicates the direction of positive cur-
rent flow (positive
_>
negative).
AC- CuRRENT mEASuREmENT
1. Set the selector switch to desired 400Amp. or 1000Amp. .
2. Press Select key to choose AC measurement.
3. Disconnect the test leads from the meter.
4. Clamp the jaws around the one conductor to be measured.
Center the conductor using the centering marks as guides.
5. Read the result from the display.
RESISTANCE mEASuREmENT
1. Connect the black test leads to “COm” socket and red test lead to the “v Ω Hz" socket.
2. Set the selector switch to desired position.
3. Press Select key to choose Resistance measurement.
4. Connect tip of the test leads to the points where the value of the resistance is needed.
5. Read the result from the display.
NOTE! When taking the resistance value from a circuit system, make sure the
power is cut off and all capacitors need to be discharged.
CAPACITANCE mEASuREmENT
1. Connect the black test lead to “COm” socket and red test lead to the “v Ω Hz" socket.
2. Set the selector switch to desired position.
3. Connect tip of the test leads to the points where the value of the capacitance is needed.
4. Read the result from the display.
˜˜ ˜˜
˜˜ ˜˜
˜˜
˜˜
Ω/