HBS 93-20-290, Operating Manual, Page: 18 / 66

18 A 22 Order No. BA 93-20-290 Issue 01.03.08
4 Function
In this chapter you learn more about the design of the welding gun and how
to use the various setting options.
4.1 Components of the Welding Gun Ceramic
The body of the welding gun consists of a sturdy two-part plastic
housing (1).
The control cable and the solenoid cable (2) are connected through the
welding gun handle to the welding gun. The welding cable (3) is externally
connected.
Positioned at the front of the welding gun there is the stud chuck where the
welding elements of the welding gun are manually fed.
A tripod with foot piece, where the ceramic ferrule holder is inserted, is used to position
the welding gun vertically.
The springy welding elements are projecting out of the ceramic ferrule holder with
ceramic ferrule. In this way, they can be positioned above the aluminum ball or the cone.
At the front of the welding gun handle, the
welding gun trigger (4) is
installed. It is used to trigger the welding process.
The serial number (5) can be found on the welding gun handle.
The screw cap (6) is used to cover the damper.