Safety instructions
U9C
A3815-1.4
HBM: public
5
case of overloading. The breakage of a force transducer can cause damage to
property or injury to persons in the vicinity of the force transducer.
If force transducers are not used according to their designated use, or if the
safety instructions or specifications in the mounting and operating instructions
are ignored, it is also possible that the force transducer may fail or malfunction,
with the result that persons or property may be affected (due to the loads act
ing on or being monitored by the force transducer).
The scope of supply and performance of the transducer covers only a small
area of force measurement technology, as measurements with (resistive) strain
gauge sensors presuppose the use of electronic signal conditioning. Equipment
planners, installers and operators should always plan, implement and respond
to the safety engineering considerations of force measurement technology in
such a way as to minimize residual dangers. Pertinent national and local regu
lations must be complied with.
Markings used
Symbol
Significance
WARNING
This marking warns of a
potentially
dangerous situa
tion in which failure to comply with safety require
ments
can
result in death or serious physical injury.
CAUTION
This marking warns of a
potentially
dangerous situa
tion in which failure to comply with safety require
ments
can
result in slight or moderate physical injury.
Note
This marking draws your attention to a situation in
which failure to comply with safety requirements
could
lead to damage to property.
Important
This marking draws your attention to
important
infor
mation about the product or about handling the prod
uct.
Tip
This marking indicates application tips or other infor
mation that is useful to you.
Emphasis
See …
Italics are used to emphasize and highlight text and
identify references to sections, diagrams, or external
documents and files.