Mechanical installation
12
A03578_02_Y00_00
HBM: public
PW29P
To do this, load the installed load cell with approx. 120% of the service load, at
the maximum eccentricity for the particular application. The maximum
permissible loadings stated in the specifications must not be exceeded. Note in
particular the “Limit load at max. 100 mm eccentricity" specification, and take
into consideration the moment produced by the eccentricity in your individual
application. Then adjust the screw of the overload stop and fix it in position with
a screw locking adhesive, such as Loctite.
