HBM PW15AH, Mounting Instructions

Page: 13 / 56

Mounting and load application
PW15AH
A02435_02_Y00_00 HBM: public
11
4.2 Load application
Clamp the load cells firmly at the mounting holes and apply the load at the
other end. The recommended screws and tightening torques can be found in
the table below:
Maximum capacities Thread Min. property class Tightening torque
1)
10 ... 100 kg M6 10.9 14 N
⋅
m
1)
Recommended value for the specified property class. Please note the information on screw
dimensions provided by the screw manufacturer.
Load must not be applied to the side where the cable connection is located, as
this would cause a force shunt.
Platform center
Load application
Connection cable
Mounting
Spacing washer