HBM GK7000, Operating Manual, Page: 30 / 132

Setup and operate the GK7000 / GK7600
28
A03435_01_Y00_01 HBM: public
GK7000 / GK7600
S
Control settings:
adjust alarm­ and range window and start­/ stop­/ end Conditions,
data­reduction, measuring­time
Refresh curve mode:
- “Dynamic” permanent indication during the process
- “On process ready” indication of the curve after the process in ready
S
Data storage:
configure data­storage mode of the MP85, the target for data­storage:
Options with "external" storage target:
- Flash­disk in the folder „Flash disc 1“
- Additional USB­stick (selection via , is displayed as „Hard Disk“)
- Network­path (if GK7000 / GK7600 and MP85 are running in a Ether­
net­network) or if MP85 is equipped with a memory card
- SD card in MP85
S
Limit values:
Adjust und parameterization limit switches of the MP85 and display of their
relevant states.
S
Inputs­Outputs:
adjust the functions of the digital IN­ and Outputs of the MP85 and display
their status
S
Parameter Set:
Load­/ save parameter­sets and factory settings to the flash (internal MP85
memory)
or MMC/SD­card memory of the MP85
or on the GK7000 / GK7600 as backup
S
Change passcode:
change the admin­password (standard is “1111”)