HBM GK7000, Operating Manual

Page: 21 / 132

Setup and operate the GK7000 / GK7600
GK7000 / GK7600
A03435_01_Y00_01 HBM: public
19
8 Setup and operate the GK7000 / GK7600
8.1 Connect the GK7000 / GK7600 with the MP85
Commissioning
S
Mount and connect sensors and power supply to the MP85, refer to the
manual.
S
Connect Ethernet from MP85 to GK7000 / GK7600 (peer­to­peer) or in a
Network via a Ethernet­Switch. Use standard Cat5 cables, check if
GK7000 / GK7600 is doing auto­crossing, if no use cross­cable. (GK7000 /
GK7600 has auto­crossing and needs only 1:1 cable)
S
Connect power to the GK7000 / GK7600 (GK7000 10…24 V DC, GK7600
11…36 V DC), refer to manual.
8.2 Quick Start Guide
Switch GK7000 / GK7600 on via On/Off switch on the front­side, the IPC
start­logo appears.
After some seconds the EASYmonitorCE Version­info and the Network­screen
appears.
Tip
On the GK7000 / GK7600 a software keypad pops up if numbers or text has
to be entered.
For number entry:
Fig. 8.1 Software keypad