K.1.2
GN811 Basic 1MS/s input card
l
8 analog channels
l
Single
-
ended inputs
l
±
1 V to
±
50 V input range
l
User selectable digital Bessel and FIR filters
l
1 MS/s sample rate
l
16 bit resolution
l
256 MB memory
l
Single metal BNC for each channel
The GEN DAQ Basic 1 MS/s input card is a general purpose signal
conditioner for use with voltage inputs, externally conditioned
signals or probes and current clamps.
The basic signal conditioner provides eight channels of single
-
ended voltage inputs from
±
1 V to
±
50 V Full Scale with full offset
and auto
-
zero capability. Every channel is equipped with an
independent full range input amplifier, a seven
-
pole Bessel and
Butterworth anti
-
alias filter, a 16 bit Analog
-
to
-
Digital converter
operating at 1 MS/s and several selections of digital filtering.
The on
-
board transient memory size is 128 Mega
-
Samples (256
Mega
-
Bytes). The memory is shared among enabled channels.
Each channel also features two set
-
points for trigger or alarm
purposes. Extensive acquisition and trigger modes allow for many
different ways to capture valuable data, even at the highest sample
rates. All channels are synchronously sampled at full speed without multiplexing
and almost immeasurable crosstalk. The model uses standard metal BNC
connectors. The inputs have an impedance of 1 MΩ and are compatible with
probes and current clamps.
For more information on the GN811 Basic 1M input card, please refer to
"B2640-3.1 en (GEN series GN811)" on page 1036.
1
2
3
4
5
6
7
8
1 MW 250Vpk
!
1
2
3
!
4
5
6
7
8
GEN3i
988
I3763-3.1 en HBM: public
