HBM DMP41, Interface Description

Page: 61 / 92

Command set of the HBM interpreter
Amplifier functions
DMP41
A03474_04_E00_00 HBM: public
61
29 Maximum value
Gross
mV/V
30 Maximum value Net mV/V
31 Maximum value
Absolute
mV/V
32 Peak-to-peak mV/V
33 Meas. val. Gross Unit 2
34 Meas. val. Net Unit 2
35 Measured value
Absolute
Unit 2
36 Minimum value
Gross
Unit 2
37 Minimum value Net Unit 2
38 Minimum value
Absolute
Unit 2
39 Maximum value
Gross
Unit 2
40 Maximum value Net Unit 2
41 Maximum value
Absolute
Unit 2
42 Peak-to-peak Unit 2
43 Measured value in
ADU
p2 Number of measured values
0 Send continuously
1 ... 65 535 Default = 1
Parameter: p3
Follow‐up time in seconds 0.1 s to 60.0 s.
Output time in seconds between measured values (only for
binary measured value output).
Effect: The measured value of the required signal p1 is output. The
output format depends on the last COF and TEX com­
mands. The command CHS is used to determine from
which channel the measured values are output.
Response: Measured value (output format see COF command).