HBM C16A C3, Operating Manual

Page: 24 / 124

Electrical connection
22
A1460-4.0 HBM: public
C16A
Notice
There is a danger of lightning strikes if mounted out­
doors.
Use a sufficiently dimensioned overvoltage protection in
addition to the correct shielding (see Chapter 7.5, EMC
protection).
7.1 Connection in six-wire configuration
white
black
gray
Excitation voltage (+)
green
red
Shielding/drain wire,
connected to housing
Excitation voltage (-)
Sense lead (-)
Measurement signal (+)
blue
Sense lead (+)
Measurement signal (-)
Fig. 7.1 Pin Assignment
7.2 Shortening the cable
If the transducer is connected to an amplifier in a six-wire
configuration, the transducer cable can be shortened as
required, without adversely affecting the measurement
accuracy.