HBM BN100A, Operating Manual, Page: 6 / 40

Safety instructions
4
A0643-6.1 HBM: public
BN100A
Install the BN100A so that it can be disconnected from
the mains at any time without difficulty. Make sure that
the mains plug is accessible.
Maintenance and cleaning
The BN100A module is maintenance‐free. Please note
the following points when cleaning the housing:
- Before cleaning, disconnect the devices from the power
supply.
- Clean the housing with a soft, slightly damp (not wet!)
cloth. You should
never use solvent, since this could
damage the labelling on the front panel and the display.
- When cleaning, ensure that no liquid gets into the
device or connections.
Residual dangers
The scope of supply and list of components provided with
the BN100A cover only part of the scope of measurement
technology. In addition, equipment planners, installers
and operators should plan, implement and respond to the
safety engineering considerations of measurement tech­
nology in such a way as to minimise residual dangers.
Prevailing regulations must be complied with at all times.
There must be reference to the residual dangers connec­
ted with measurement technology.
Any risk of residual dangers when working with the
BN100A is pointed out in this manual by means of the
following symbols: