i
Lt_
WARNING
Read and understand the entire contents of this
Manual before attempting set•up or operation!
Failure to comply may cause serious injure!
CONTENTS OF SHIPPING CONTAINER
z
1 Milling & Drilling Machine
1 3/8 Drawbar
1 Digital Scale & Speed Readout (Optional)
1 Test Flow Chat
1 Operator manual
1 Toolbox & Tools
Toolbox Contents (Fig. 01)
1
Oil Gun
1
MT2Arbor
2
Double End Spanner (17-19)
6
Hex Socket Wrench (2.5,3,4,5,6,8mm)
1
Flat Blade Screwdriver
1
Cross Blade Screwdriver
4
Handle
·2
M1 O 'T' Screw
2
M10 Washer
2
M10 Nut
Unpacking and Clean-up
1. Finish removing the wooden crate from around
the mill/drill.
2. Unbolt the machine from the crate bottom.
3. Sling mill/drill with the proper equipment.
4. Clean all rust protected surfaces using a mild
commercial solvent, kerosene or diesel fuel. Do not
use paint thinner, gasoline, or lacquer thinner.
These will damage painted surfaces. Cover all
cleaned surfaces with a light film of machine oil.
- 6 -
D
Fig. 01
