AED9101D
I3563-1.0 en
9
3
Introduction
3.1
Scope of supply
S
Quick start guide
S
AED9101D (basic device)
A PDF of this operating manual is available on the HBM
website (www.hbm.com) under HBMdoc at
Digital weigh
ing electronics
.
3.2
Application
AED9101D digital transducer electronics are part of the
AED component family that digitally conditions signals
from mechanical transducers and networks them with
bus capability. They include digital amplifier boards, basic
devices with serial interfaces, and intelligent sensors with
integrated signal conditioning.
Using AED9101D digital transducer electronics, you can
connect SG
1
transducers in a full bridge circuit directly to
a computer or a PLC. This enables you to configure com-
plete measuring chains quickly and with little extra work.
The AED9101D basic device takes AD101B or AD103C
amplifier boards. It provides mechanical protection,
shields the amplifier board (EMC protection) and allows
you to select RS-422 (factory setting), RS-485 or RS-232
serial interfaces. An amplifier board is not included in the
scope of supply of the basic device, and must be ordered
separately.
1)
S
train
g
auges