HBK HLCM, Mounting Instructions

Page: 9 / 64

7
HLCM
MOUNTING INSTRUCTIONS
4 MOUNTING INSTRUCTIONS
S
It should be ensured that the mounting / siting surfaces are clean, flat and level.
Depending on the installation circumstances, any levelling error can be compensated
for example by suitable wedges and compensating plates (weld on) or by grinding
away the mounting surface.
Important
On no account the module plates must be grind off.
S
The foundation/base frame must be sufficiently stiff so that no impermissible defor­
mations (e.g. deflections) occur on loading.
S
In order to keep the mounting free of straining forces, the fastening holes on the base
frame and the tank joint must be sufficiently in alignment.
S
Uniform loading on the support points should be provided where possible. Correct
adjustment of the height on the supporting points must be ensured (have compensat­
ing shims ready). This is especially important for statically undefined supports.