HBK HLCM, Mounting Instructions

Page: 11 / 64

9
HLCM
OPERATION
6 OPERATION
S
Dust, dirt and other foreign bodies must not be allowed to collect in such a way that
movement of the transducer is restricted.
S
The load introduction device (pendle bearing) applies restoring forces which have a
self‐centering effect in the case of transverse forces. If these are exceeded, an inad­
missibly large inclination of the pendle bearing and thus incorrect measuring results
or damage to the load introduction elements or the load cell can result.
S
Lateral displacements which exceed the maximum permissible value should be
avoided by aligning the other modules appropriately, or should be absorbed by other
stops or retention devices.