HBK AED 9101D, Quick Start Manual

Page: 5 / 40

3
AED
SAFETY INSTRUCTIONS
1 SAFETY INSTRUCTIONS
Intended use
The device is to be used exclusively for measurement tasks and directly related control
tasks within the operating limits detailed in the specifications. Use for any purpose other
than the above is deemed improper use.
Any person instructed to carry out installation, startup or operation of the device must
have read and understood the operating manual and in particular the technical safety
instructions.
In the interests of safety, the device should only be operated by qualified personnel and
as described in the Operating Manual. The same applies to the use of accessories.
The device is not intended for use as a safety component. Please also refer to the “Addi­
tional safety precautions” section. Proper and safe operation requires proper transporta­
tion, correct storage, siting and mounting, and careful operation.
Operating conditions
S
Protect the device from direct contact with water.
S
Protect the device from moisture and weather such as rain or snow. The protection
class of the device is IP65 (DIN EN 60529).
S
Do not expose the device to direct sunlight.
S
Comply with the maximum permissible ambient temperatures and the specifications
regarding maximum humidity.
S
The design or safety engineering of the device must not be modified without our ex­
press consent. In particular, any repair or soldering work on motherboards (replace­
ment of components) is prohibited. When exchanging complete modules, use only
genuine parts from HBM.
S
The device is supplied ex works with a fixed hardware and software configuration.
Changes can only be made within the range of possibilities described in the corre­
sponding documentation.
S
The device is maintenance free.
S
Please note the following when cleaning the housing:
- Disconnect the device from all current and voltage supplies.
- Clean the housing with a soft, slightly damp (not wet!) cloth. Never use solvent, as
this could damage the label or the housing.
- When cleaning, ensure that no liquid gets into the device or connections.
S
Devices that are no longer usable must be disposed of separately from regular house­
hold waste in accordance with national and local regulations for environmental pro­
tection and raw material recovery.