manualshive.com logo in svg

HBC H3C S5130-E Series, Manual, Page: 13 / 34

Share
Download
HBC H3C S5130-E Series Manual Download Page 13

6 

To display the load sharing mode used on each IRF port in the IRF fabric, specify the 

irf-port

 keyword but 

not any IRF port. If no IRF ports are in up state, this command displays 

No IRF link exists

. 

To display the load sharing mode used on a specific IRF port, specify both the 

irf-port

 keyword and the 

member-id

/

port-number 

argument. 

Examples 

# Display the global load sharing mode for IRF links. In this example, because no user-defined global 

load sharing mode has been configured, the default global load sharing mode applies. 

<Sysname> display irf-port load-sharing mode 

irf-port Load-Sharing Mode: 

Layer 2 traffic: packet type-based sharing 

Layer 3 traffic: packet type-based sharing 

# Display the global load sharing mode for IRF links. In this example, because a user-defined global load 
sharing mode has been configured, the user-defined global load sharing mode applies. 

<Sysname> display irf-port load-sharing mode 

irf-port Load-Sharing Mode: 

destination-ip address   source-ip address 

# Display the load sharing mode of IRF-port 1/1. In this example, because neither port-specific load 
sharing mode nor user-defined global load sharing mode has been configured, the default global load 

sharing mode applies. 

<Sysname> display irf-port load-sharing mode irf-port 1/1 

irf-port1/1 Load-Sharing Mode: 

Layer 2 traffic: packet type-based sharing 

Layer 3 traffic: packet type-based sharing 

# Display the load sharing mode of IRF-port 1/1 after destination MAC-based load sharing is configured 
on the port. 

<Sysname> display irf-port load-sharing mode irf-port 1/1 

irf-port1/1 Load-Sharing Mode: 

  destination-mac address 

Table 5

 

Command output 

Field Description 

irf-port Load-Sharing Mode 

Global load sharing mode for IRF links: 

•

 

If no global IRF link load sharing mode has been configured, the 

default global load sharing mode applies. 

•

 

If a user-defined global load sharing mode has been 

configured, the configured mode applies. 

irf-port1/1 Load-Sharing Mode 

Link load sharing mode of IRF-port 1/1: 

•

 

If you have not configured a port-specific load sharing mode, 

the global IRF link load sharing mode applies. 

•

 

If you have configured a port-specific load sharing mode, the 

configured mode applies. 

Layer 2 traffic: packet type-based 
sharing 

Default load sharing mode for traffic that has no IP header. By 
default, this type of traffic is distributed based on packet types. 

Layer 3 traffic: packet type-based 
sharing 

Default load sharing mode for non-TCP/-UDP IP packets. By default, 
this type of traffic is distributed based on packet types. 

Summary of Contents for H3C S5130-E Series



































Reviews:

No comments