HB-100/140/160Z1
Temperature Control Unit
Structure and function
30
O8285-EN 2017-12
4.5 Connections
Fig. 4: Connections
The connections and important components on the rear of the unit
are marked as follows:
A
OUT
Main line
B
IN
Return line
C
Cooling water inlet
D
Cooling water outlet
G
Drain
Pressure indicator
Cooling water filter
E
S1
System water inlet *
F
S2
System water outlet *
J
AIR IN
Compressed air inlet (additional equipment ZG)
K
AIR OUT
Compressed air outlet (additional equipment ZG)
N
Mains connection cable
* The connections for system water inlet and outlet can only be used when switched
to separate connections for system water (
page 42).
** Only use the compressed air outlet connection when the
Mould evac. with compr.
air
parameter
is set to “Tank” (
