HB-THERM T24629-X, Assembly Instructions Manual

Page: 3 / 6

Assembly Instructions M8086-EN
M8086-EN 2020-02
3/6
Fig. 1: Removing level indicator
Fig. 2: Pulling out level indicator
Only on T25865-1 and replacement sonic transducer BB 1
5. To enable accessibility to the transducer (BB 1), the level
indicator (10) must be removed. Proceed as follows:

Undo screws on pipe (Label 1

Fig. 2).

Remove 6x screws (Label 2

Fig. 1).

Pull out level indicator (Label 3

Fig. 2) so that accessibility to
the transducer (BB 1) is ensured.
6. Proceed as follows in order to remove the sound transducer
(BB 1, BB 2):

Remove the screws and mounting plate of the sound
transducer.

Remove sound transducer.

Remove O-ring.

Unplug cable of the sound transducer (BB 1, BB 2) on slot
X 53.1 or X 53.2.
7. Proceed as follows to assemble the new sound transducer
(BB 1, BB 2)

Clean installation space of sound transducer, especially groove
for O-ring.

Insert the new O-ring in the groove.

Fit the sound transducer with the mounting plate and screws
carefully.

Transfer the cable labelling of the old sound transducer to the
new sound transducer.

Insert the sound transducer into the corresponding slot at the
X 53.1 or X 53.2.
0
0
2
1
3